FOOTNOTES:

H Must be revision #BØ (or later) for ’95–97 models.

J Must be revision #BØ for 9000 winch PN 27550 or 28500.

K Except models with far forward mounted stabilizer bar.

L Must be revision #FØ for 9000 winch PN 27550 or 28500.

M Roller Fairlead PN 5742 required.

T Available while supplies last.

U Will not clear factory fog lights on STX models.

V 20'/6m Power Lead (PN 32963) or 24'/8m Power Lead (PN 32966) required for winching from rear. W Must be revision #JØ for 9000 winch PN 27550 or 28500.

W Must be revision #JØ for 9000 winch PN 27550 or 28500.

Y Use light kit PN 220412 or PN 220312 or PN 220332.

(*) Cannot be used with winch carrier when winch is mounted.

(1) Not recommended for Turbo Diesel models with air intake openings in bumper.

(4) Moves factory bumper forward five inches.

(5) Intended to be sold with PN 38772.

(6) Front Receiver applications (Does not fit diesels) '00 1 Ton, ’80–91 Pickup 1/2 Ton (2 & 4WD) and 3/4 Ton 2WD is PN 25862. ’80–91 Pickup 3/4 Ton 4WD with leaf springs is PN 25852.

(7) Must be Revision PØ to mount X8000i or XD9000i..

(13) Will not fit 2WD models with coil springs. Will not fit vehicles with factory Blocker Beam.

(14) Must be Rev. BØ for ’99–00 models.

(16) Fits Series 9 or 12 commercial winch with 12"/304.8mm wide foot print.

(17) Must be Rev. BØ for HS9000 winch PN 47550, 48500.

(19) Requires factory tow hooks or Adapter Kit PN 37174.

(22) Roller Fairlead Cover 25580 recommended.

(23) Roller Fairlead Cover 35363 recommended.

(24) Cannot be used with optional factory driving lights.

(25) This carrier will block the factory fog/driving lights on vehicles so equipped.

(27) Cannot be used with HS9500i & HA9500.

NOTE: Warn designs and manufacturers several different mounting systems to accommodate our recreational vehicle winches. When properly mounted, these systems do not interfere with the factory air bag system. This opinion is based on analysis by our engineers and a limited number of crash tests. When installing a winch mount on a vehicle, the installer should take care to ensure that placement of the mount does not interfere with the factory air bag sensors. In addition, the vehicle sensors should not be moved or modified in any way. It is not practicable to test every possible vehicle and winch mount combination, and Warn has not attempted to do so. We recommend that the user check with the vehicle manufacturer and a reputable, qualified mechanic to determine whether a particular installation may interfere with the air bag system. The consumer should then make a personal decision as to the appropriateness of this accessory for the particular vehicle. Warn cannot and does not guarantee the proper operation of the vehicle's air bag system if the winch is mounted contrary to the vehicle manufacturer's recommendations.